It can be applied at sub zero surface temperatures. Suitable for properly prepared carbon steel and aged coating surfaces. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Specially designed for areas where optimum surface preparation is not possible or desired. It is a surface tolerant, high solids product. This is a two component polyamine cured epoxy mastic coating. Available in: 5 litre and 20 litre units.Buying a 20 litre tin over against a 5 litre tin the price will decrease slightly.Jotun Jotamastic 80 WG is a two-component, surface-tolerant, high solids epoxy mastic coating which can be applied in low film thickness. Jotun Jotamastic 80 would normally cost between £9 and £11 per litre depending on the amount purchased.

– Needs to be used within 2 hours of being mixed at 23 ✬ (this reduces to 1 Hour if using winter grade version) – Can be applied at sub-zero temperatures Jotun Jotamastic 80 can be applied using airless spray and using a brush or a roller with extra care taken to achieve the specified dry film thickness. In the marine industry it can be used on outside hulls, exterior and interior areas and it can be used as a protective coating for offshore environments, refineries, power plants, bridges, building, mining equipment and general structural steel. Jotamastic 80 is primarily designed for maintenance and repair, only aluminium version is to be used in immersed environments. It can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Jotun Jotamastic 80 is suitable for properly prepared carbon steel and aged coating surfaces. Jotamastic 80 is designed for areas where optimum surface preparation is not possible or desired and can also be applied at sub-zero surface temperatures. Jotun Jotamastic 80 is a two-component polyamine cured epoxy mastic coating which is surface tolerant, high solids product.

Download jotamastic 80 for free